Product Reviews

Silkland DP80 DisplayPort Cable Review: A Short, High-Bandwidth Link for Gaming

A short DisplayPort cable for gamers with DP 2.1 equipment who want a VESA-certified connection and minimal cable slack.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review is most relevant if you want a short connection between a DisplayPort-equipped PC and monitor, and your setup can use DP 2.1 bandwidth.

Its 1.6-foot length, VESA certification, and support for high refresh rates suit a close-range gaming desk, though the full benefit depends on both connected devices.

Silkland DP80 Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers with DP 2.1 equipment who want a VESA-certified connection and minimal cable slack.

  • DisplayPort 2.1 cable with a listed data rate of 80Gbps and VESA certification.
  • 1.6-foot length, male-to-male DisplayPort connectors, and a latch-free plug design.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz, and higher listed refresh rates at 4K.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a, and MST.

Pros

  • High bandwidth and a broad range of listed resolution and refresh-rate modes.
  • Short length can reduce excess cable slack when the PC and monitor sit close together.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor are separated or ports are awkwardly placed.
  • The highest listed resolutions and refresh rates depend on compatible source and display hardware, and some require DSC.
Read the full review summary

The DP80 is a male-to-male DisplayPort 2.1 cable rated for 80Gbps and designed for indoor use.

Its short 1.6-foot reach can help keep a nearby monitor connection tidy, while the cable’s listed modes range from uncompressed 4K at 240Hz to up to 16K at 60Hz with DSC enabled.

It is backward compatible with DisplayPort 2.0 and 1.4.

This cable is aimed at gaming PCs and monitors with DisplayPort connections, including setups using G-Sync or FreeSync. Features such as VRR, ALLM, FEC, DSC 1.2a, and MST are relevant to gaming and multi-monitor configurations.

Consider it if the cable can reach comfortably and your equipment supports the modes you plan to use; a short cable cannot overcome limits elsewhere in the signal chain.

The buying factors

Silkland DP80 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth headroom

The 80Gbps DP 2.1 rating provides substantial bandwidth for compatible high-resolution, high-refresh setups.

9/10

High-refresh support

Listed uncompressed modes include 4K at 240Hz and 2K at 540Hz, with higher modes possible using DSC.

8/10

Gaming features

VRR, ALLM, FEC, DSC, and support for G-Sync and FreeSync make the feature set relevant to gaming.

8/10

Build details

Tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior are useful construction choices.

6/10

Reach and placement

The 1.6-foot length suits a close connection but leaves little room for distant or rearranged components.

7/10

Setup flexibility

Backward compatibility helps with older DisplayPort versions, though maximum modes depend on the connected hardware.

Key Features and Specifications of Silkland DP80

  • DisplayPort 2.1 cable with a listed data rate of 80Gbps and VESA certification.
  • 1.6-foot length, male-to-male DisplayPort connectors, and a latch-free plug design.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz, and higher listed refresh rates at 4K.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a, and MST.
  • Backward compatible with DisplayPort 2.0 and 1.4, with 7.1, 5.1, and 2.0 uncompressed audio pass-through.
  • Construction includes 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.

Pros and Cons of Silkland DP80

Pros

  • High bandwidth and a broad range of listed resolution and refresh-rate modes.
  • Short length can reduce excess cable slack when the PC and monitor sit close together.
  • Gaming-relevant support includes VRR, ALLM, G-Sync, and FreeSync compatibility.
  • Shielding and tinned copper conductors are intended to support a stable signal path.

Consider before buying

  • At 1.6 feet, it may not reach comfortably if the PC and monitor are separated or ports are awkwardly placed.
  • The highest listed resolutions and refresh rates depend on compatible source and display hardware, and some require DSC.
  • A latch-free connector may be less secure in installations where the cable is frequently moved or pulled.

Who Should Buy Silkland DP80?

Good fit

Consider the DP80 if your gaming PC and monitor both have DisplayPort ports, sit close together, and you want a cable rated for DP 2.1’s 80Gbps bandwidth.

Its listed support for high refresh rates, VRR, and DSC gives it room for demanding display configurations when the rest of the setup supports them.

Before choosing it, measure the actual route between the ports, including any clearance needed for bends.

Check your graphics card and monitor specifications for their DisplayPort version, supported resolution and refresh rate, and whether DSC is needed for your target mode.

Who should skip it

Choose a longer cable if your PC and display are farther apart, or if you need extra slack to move either device. This model’s 1.6-foot reach is suited to close placement.

Look elsewhere if your setup relies on HDMI or an adapter rather than direct DisplayPort-to-DisplayPort connection. The cable’s listed use is for devices with DisplayPort ports.

What the Silkland DP80 Means for a Gaming Setup

Bandwidth depends on the whole setup

The 80Gbps rating and UHBR20 support make this cable appropriate to consider for newer, demanding DisplayPort configurations. Actual output still depends on the graphics card, monitor, and selected settings.

The product lists uncompressed 4K at 240Hz and 8K at 60Hz, while some higher modes require DSC, so check both devices against the mode you intend to run.

A very short run has a specific job

At 1.6 feet, the DP80 is best suited to a PC positioned right beside or beneath the display.

Less excess cable can make a compact setup easier to manage, but the short reach can become restrictive around a desk, monitor arm, or ports that face an inconvenient direction.

Measure the route rather than relying on the straight-line distance between devices.

Gaming and multi-monitor features

VRR, ALLM, FEC, DSC, and compatibility with G-Sync and FreeSync address common gaming setup needs. MST is listed for multi-monitor arrangements, but every monitor and graphics output must also support the intended configuration.

If you plan to expand across several displays, verify the ports and supported connection arrangement before buying.

Construction and connector handling

The cable uses 28AWG tinned copper conductors, triple shielding, gold-plated connectors, and a nylon exterior. These are practical build details for a cable that may be routed around a desk.

Its latch-free plug avoids a release mechanism, so check that the connector seats securely in your equipment and that the cable will not be tugged during ordinary use.

Alternatives to Silkland DP80

One useful alternative is included because it offers a meaningfully longer cable and a different bandwidth and compatibility profile.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort Cable, 10 ft

Choose the DP80 when the source and monitor are close and you value its higher bandwidth rating.

The 10-foot 54Gbps model is a better fit when you need substantially more reach or broader backward compatibility, provided its listed modes meet your display requirements.

  • This 10-foot Silkland cable is rated for 54Gbps and lists support for 16K at 60Hz with DSC, 8K at 120Hz, and 4K at 240Hz.
  • It also supports DisplayPort versions down to 1.0 and has a double nylon-braided exterior.
  • The DP80 offers an 80Gbps rating and a 1.6-foot reach, with higher listed refresh-rate modes that may suit a close, high-spec gaming setup.

Is Silkland DP80 Worth It?

The Silkland DP80 is worth considering for a close-range gaming setup that connects a DisplayPort 2.1-capable PC and monitor.

Its 80Gbps rating, VESA certification, gaming features, and listed high-refresh modes make it a strong feature fit for compatible hardware.

Its short reach is the main practical constraint, and its highest modes are not guaranteed by the cable alone.

Measure your route and confirm what both devices support before buying; if the connection needs more distance, consider a longer cable instead.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers with DP 2.1 equipment who want a VESA-certified connection and minimal cable slack.

  • DisplayPort 2.1 cable with a listed data rate of 80Gbps and VESA certification.
  • 1.6-foot length, male-to-male DisplayPort connectors, and a latch-free plug design.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, supports up to 16K at 60Hz, 8K at 240Hz, and higher listed refresh rates at 4K.
  • Supports UHBR20, dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a, and MST.

Written by

digital360.co Editorial Team

Editorial team

digital360.co publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short DisplayPort cable for gamers with DP 2.1 equipment who want a VESA-certified connection and minimal cable slack.

  • DisplayPort 2.1 cable with a listed data rate of 80Gbps and VESA certification.
  • 1.6-foot length, male-to-male DisplayPort connectors, and a latch-free plug design.
Check Video Reviews on Amazon